Skip to navigation
AL2000 — Linear Slot Diffuser

How to Specify

AL20 [1] [2] [3] [4] [5] [6]

[1] Type:

  • 50 - 1/2" slot
  • 75 - 3/4" slot
  • 10 - 1" slot

[2] Style:

  1. Diffuser Only
  2. Diffuser with pattern controller

[3] Number of Slots:

  • 01-08 slots

[4] Mounting Style:

  • B0 - T-Bar Lay-in -Diffuser Only
  • E0 - Diffuser Only
  • E1 - Hanger Bracket
  • E2 - Standard Mounting Frame
  • F0 - Screw holes in margin

[5] End Caps:

  • E1 - One end
  • E2 - Both ends
  • 00 - None

[6] Length (inches)

  • 12" min
  • 999" max

[7] Finish

  • CLR - Clear Anodized
  • WHT - Bright White

AL2000 — Linear Slot Diffuser

Assets/Details

AL2000 PG101.7 (121 KB, PDF)
AL2000 PG101.6 (135 KB, PDF)
AL2000 PG101.5 (136 KB, PDF)
AL2000 PG101 (119 KB, PDF)
Performance Data (303 KB, PDF)
  • Extruded alumninum construction
  • Three slot types: 50 (1/2" slot), 75 (3/4" slot), 10 (1" slot)
  • One to eight slots wide for air volume of 10-350 cfm per foot
  • Adjustable pattern controller
  • Three margin styles: B, E, F
  • 12" minimum length.
  • Maximum one-piece length 72", lengths over 72' made in multiple units with pin splices for even continuous lengths (1/8" increments). 999" maximum continuous length.
  • Available as diffuser-only or diffuser with pattern controller.

Style Details

S Series Style Details

Margin Styles

  1. Style B0
  2. Style E1 / E2
  3. Style E0 / F0
  4. Miltered Corners

AL2000_B0 B0 – T-Bar Lay-in Diffuser Only

 

Duct Width: A + 1/16
Overall Width: A + 7/8

2' x 2'2' x 4'
with End Caps24in48in

E1 - Linear Slot DiffuserE1

Overall Width: A + 3/4

 

Please see submittal drawing & hyperlink for details

E2- Linear Slot DiffuserE2

Overall Width: A + 3/4 

 

Please see submittal drawing & hyperlink for details

F0 - Linear Slot DiffuserE0 – Diffuser Only

Duct Width: A + 7/16
Overall Width: A + 7/8

F0 - Linear Slot DiffuserF0 – Screw Holes in Margin

Duct Width: A + 7/16
Overall Width: A + 7/8

HC MITERED CORNERg

Mitered Corners

  • 90-degree mitered corners are available as factory-fabricated section. Precise factory cutting and assembly reduces field fabrication time and assures proper fit. Corner sections are furnished and blanked off. Corner sections butt to adjacent straight sections, which are spliced together with aligning keys.
  • Mitered corners are furnished in mounting style E2. When viewed from the room side, the mitered corner section appears identical to the butting straight sections.
  • Plaster frame mitered corners can be specified with the outlet mitered corner.
NOTE: DRAWING REQUIRED when ordering linear or slot diffusers with mitered corners.

 

How to Order

S [1] [2] [3] [4] [5] [6] [7]

[1] Type:

  • 50 - 1/2" slot
  • 75 - 3/4" slot
  • 10 - 1" slot

[2] Number of Slots:

  • 01-08 slots

[3] Mounting Style:

  • B0 - T-Bar Lay-in -Diffuser Only
  • E0 - Diffuser Only
  • E1 - Hanger Bracket
  • E2 - Standard Mounting Frame
  • F0 - Screw holes in margin

[4] Milter Type:

  • C - Ceiling
  • SI - Sidewall Inside
  • SO - Sidewall Outside

[5] MC

[6] 90

[7] Finish

  • CLR - Clear Anodized
  • WHT - Bright White